Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

 

Version Date Comment
Current Version (v. 5) Jun 23, 2014 09:46 David Modderman:
Removed the meaning of the status LEDs and just left a description of the purpose of the LEDs. The LED meanings are covered in the quick start guides.
v. 6 Jun 23, 2014 10:16 David Modderman:
Added picture of power indicator LED.
v. 5 Jun 23, 2014 09:46 David Modderman:
Removed the meaning of the status LEDs and just left a description of the purpose of the LEDs. The LED meanings are covered in the quick start guides.
v. 4 Nov 29, 2013 10:33 David Modderman:
Specified LED information which is specific to the uFirewall application
v. 3 Jun 20, 2013 03:57 David Modderman:
Migrated to Confluence 5.3
v. 2 Jun 20, 2013 03:57 David Modderman:
Minor spelling correction
v. 1 Jun 19, 2013 10:30 David Modderman:
Initial Release

 

1. Overview

The PIKA µWARP is a small stand-alone networking appliance used for multiple end user applications such as a Voip Firewall, Virtual Private Network, Session Border Controller, etc.

1.1. Interfaces

The PIKA µWARP provides the following interfaces:

  • Two 10/100BaseT network ports
  • One USB 1.1 host with two type A USB jacks (one is used for connecting power to)
  • Reset button
  • Status LEDs

 

2. Regulatory Information

2.1. Compliance

The appliance is certified compliant for use in the United States, Canada, and European Union countries. The following tables list approval information for EMC/EMI, Safety standards. Testing for all regulatory disciplines was performed at Nemko Canada product certification and compliance test facility. The tables list each country or region, its approval standard, registered approval numbers (if any), and a short description of the approval standard. 

 

The term self-declared indicates that the board was tested by a third-party test facility, but does not require an official approval number by a country or region's approval standard authority.

 

 

EMC/EMI

EMC/EMI standards govern the amount of electromagnetic interference and immunity of electrical devices. The following table lists the EMC/EMI approval information for the appliance. 

 

Country / Region 
Approval Standard 
Approval Number 
Approval Description 
United States 
FCC 47 CFR Part 15, Subpart B, Class A
Self-declared 
Rules for EMC/EMI emissions 
Canada 
ICES-003 Issue 5, Class A
Self-declared 
Rules for EMC/EMI emissions 
Europe 
EN55022: 2010, Class A
Self-declared 
Limits and measurement of EM Emissions 
EuropeEN 61000 3-2: 2006 +A1 +A2 and EN 61000 3-3:2008Self-declared 
Limits and measurement of EM Emissions 
Europe 
EN55024: 2010
Self-declared 
Limits and measurement of EM Immunity 

 

 
Safety

Safety standards govern the human safety of all electrical devices. The following table lists the safety approval information for the appliance. 

 

Country / Region 
Approval Standard 
Approval Number 
Approval Description 
United States / Canada 
CSA C22.2 No. 950 NRTL/C 
2609642
Safety standard for IT and telecom equipment 
Europe 
EN60950 
Self-declared 
Safety of IT and electrical business equipment 

 

 RoHS

The appliance and modules are all 2011/65/EU compliant.

 

3. Appliance Description

3.1. Power

Power is applied to the PIKA µWARP via one of the USB jacks. The two USB jacks are identical and it doesn't matter which one is used to connect the USB power supply to.

The power supply that ships with the unit is 1.5A which also accomodates the 500mA maximum current requirement of the second USB port.

  

Reset Button

In the event that the PIKA µWARP needs to be reset, a small pointed object can be inserted into the small hole on the side of the unit.


  

3.2.  Ethernet Ports

The two Ethernet ports support comply with 10/100 Base-T IEEE 802.3 standards.  The Ethernet connections are provided via standard RJ45 jacks.  CAT 5 UTP cable is recommended (CAT 3 UTP can be used for 10Mbps only).

The two Ethernet ports are identical and it doesn't matter which port is used to connect to the VoIP PBX and which port is used to connect to the network.

 

3.3. USB

The USB host is USB 1.1 compliant. The signalling lines of the port are routed to both USB connectors so either connector can be used to connect a USB device. The same is true for the USB power connection, either port can be used.

 

3.4. LEDs

There are a total of 13 LEDs on the PIKA µWARP, four of them are used for Ethernet activity and status (two per port), eight of them are used for product status, and one is used as a power indicator.

 

There are two LEDs beside each Ethernet port, one green and one orange. The green LED indicates link status and the orange LED indicates activity.

 

 

 

On the top side under the logo there is a green LED which indicates the unit is powered.


There are 8 remaining status LEDs, 4 on the top and 4 on the bottom. The LEDs on the bottom are wired together with the ones on the top.

Each LED is a bi-colour Red/Green LED. For a description of the meaning of these LEDs please reference the appropriate product quick start guides.


4. Technical Specifications

4.1. Physical Properties

Dimensions mm

(inches)

98 x 38 x 28

(3.83" x 1.50" x 1.10")

Box Dimensions mm

(inches)

250 x 170 x 60

(9.75" x 6.75" x 2.4")

Box Weight (with power supply) kg

(lbs)

0.3

(0.7)

 

4.2. Power Requirements

Maximum Power Consumption (W)

(not including power consumption of any

USB device that may be plugged in)

4
Voltage (Vdc)5

Current (A)

(not including current draw of any USB

device that may be plugged in)

0.8
Connector StyleUSB Type A

 

4.3. Environmental Requirements

Ambient Temperature (degrees C)0 to +45
Storage Temperature (degrees C)-20 to +85
Humidity, non-condensing5% to 95%

 

 

 

5. Glossary

Term 
Definition 
CSA 
Canadian Standards Association - An independent organization that establishes and tests safety standards for electronic components and systems for the Canadian marketplace. 
EMC 
ElectroMagnetic Compatibility.- The sensitivity of a system to EMI. 
EMI 
ElectroMagnetic Interference - The interference in signal transmission and reception caused by electrical and magnetic fields. 
FCC 
Federal Communications Commission - The government agency responsible for regulating telecommunications in the United States. 
LED 
Light Emitting Diode - A semiconductor diode that emits incoherent narrow-spectrum light. 
NRTL 
Nationally Recognized Testing Laboratory - The U.S. government body that determines if products meet safety standards to provide the assurance these products are safe for use in the workplace. 
RJ 
Registered Jack - RJ are telephone and data jacks registered with the FCC. 
USB 
Universal Serial Bus - A standard for providing serial access to interface devices. 
  • No labels